Brushed and polished stainless steel sheet samples side by side on a dark fabrication workshop bench
Materials

Grade 304 vs 316 stainless steel for kitchens

6 min readNov 2026

Who this is forThis guide is for kitchen owners, consultants and project managers choosing between grade 304 and grade 316 stainless steel for kitchen equipment.

Grade 304 suits most commercial kitchen equipment, including tables, sinks, shelving, ranges and hoods. Grade 316 adds molybdenum, which gives better resistance to chlorides such as salt and brine. It is worth considering for coastal locations, seafood and pickle processing, brine tanks and areas cleaned with strong chloride based chemicals. Elsewhere, good fabrication matters more than the extra grade.

Key facts

  • Grade 316 stainless steel contains molybdenum, which grade 304 does not.
  • Molybdenum improves resistance to chlorides such as salt and some cleaning chemicals.
  • Grade 304 performs well for the large majority of commercial kitchen equipment.
  • Grade 316 is worth considering in coastal sites, heavy brine use and some processing areas.

What makes them different

Both are austenitic stainless steels that rely on chromium for corrosion resistance. Grade 304 contains roughly 18 percent chromium and 8 percent nickel. Grade 316 has similar chromium, a little more nickel and about 2 percent molybdenum. That molybdenum is the important difference. It improves resistance to pitting and crevice corrosion caused by chlorides.

Chlorides are everywhere in a kitchen: table salt, brines, sea air, some bleaches and certain cleaning products. In normal kitchen use, grade 304 handles them well if surfaces are cleaned and rinsed. Grade 316 handles harsher, longer exposure better.

Where grade 304 is the right choice

  • Work tables, preparation counters and wall shelves.
  • Sinks and pot wash units in normal use.
  • Cooking ranges, hoods and ducting.
  • Trolleys, racks and storage.
  • Refrigeration cabinets and food service counters.

For these, grade 304 gives good corrosion resistance and hygiene. Steelkraft uses grade 304 as standard for this reason. Our existing guide on comparing 304 and 202 stainless steel explains why lower grades are a false economy.

Where grade 316 may be worth it

Coastal locations

Salt laden air near the sea can cause surface staining and pitting on exposed steel over time. Outdoor counters, service areas open to sea air and kitchens very close to the coast may benefit from grade 316 for the most exposed items.

Heavy brine and salt use

Pickle making, seafood processing, brining tanks and salting areas expose steel to concentrated chlorides for long periods. Grade 316 is often the safer choice here.

Strong chemical cleaning

Areas cleaned frequently with chlorine based chemicals, especially if not rinsed well, put extra stress on the surface. Grade 316 tolerates this better, though correct cleaning practice still matters.

Specific processing needs

Some food processing applications specify grade 316 for particular contact parts. Follow the specification for those items.

Fabrication matters as much as grade

A poorly welded grade 316 table can corrode faster than a well made grade 304 one. Welds should be continuous and cleaned so the protective surface layer re-forms. Heat tint and weld scale left on the surface are weak points. Mixing tools used on carbon steel with stainless steel can also leave iron particles that rust. Our guide to what to check in kitchen fabrication covers this.

Mixing grades sensibly

You do not have to choose one grade for the whole kitchen. A common approach is grade 304 for most equipment and grade 316 only for the items with the harshest exposure. This keeps cost sensible while protecting the parts most at risk.

How to confirm the grade

Ask for written confirmation of the grade for each item and, where possible, mill test certificates for the sheet. Magnet tests are not reliable for telling these grades apart. Specialist testing can confirm composition if there is any doubt.

Steelkraft manufactures stainless steel work surfaces and work tables built to size in grade 304 as standard, fabricated in-house. For coastal projects, see our pages on stainless steel kitchen equipment in Kerala and stainless steel kitchen equipment in Mumbai.

Cost and value

Grade 316 usually costs more than grade 304 because of its molybdenum and nickel content. Using it throughout a kitchen raises the budget without a matching benefit in most areas. The value comes from using it where it prevents early corrosion, such as brine tanks or equipment exposed to sea air. In those places, the higher grade can last much longer than grade 304 would, which justifies the extra cost.

Common mistakes

One mistake is specifying grade 316 everywhere because it sounds better, then cutting corners on sheet thickness or weld quality to stay within budget. A well fabricated grade 304 kitchen will usually outperform a poorly built grade 316 one. Another mistake is assuming that grade 316 needs no care. Salt residue left overnight and strong chemicals that are not rinsed off can still mark it.

A third mistake is not specifying the grade at all. If the purchase order says only stainless steel, you may receive a lower grade such as 202 or 430 for some parts. Always write the grade for each item into the order and ask for confirmation.

When in doubt, discuss the site conditions and cleaning routine with the manufacturer before deciding on grade for each item.

Frequently asked questions

Is grade 316 always better than grade 304?

Grade 316 resists chlorides better, but for most kitchen equipment grade 304 performs well. Grade 316 makes sense where salt, brine or harsh chemicals are a constant presence.

Can I tell grade 304 and 316 apart by looking?

No. They look the same. Written grade confirmation, mill test certificates or laboratory testing are the reliable ways to know.

Does grade 316 need different cleaning?

Cleaning is similar. Use suitable non abrasive cleaners, rinse chloride based products off well and avoid steel wool on both grades.

If you are unsure which grade suits your site, ask Steelkraft for advice.

You might also like

Compact cloud kitchen pod with a stainless steel range, prep counter, undercounter fridge and wall shelving in a narrow room
Cloud Kitchens

Cloud kitchen pods: planning 100 to 200 sq ft

How to plan a compact cloud kitchen pod of 100 to 200 square feet so it is safe, compliant and fast during delivery peaks.

Top down view of a commercial kitchen floor plan drawing on a dark desk with a pencil and steel ruler
Kitchen Planning

How to Plan a Commercial Kitchen Layout for a Restaurant in Bangalore

A well planned kitchen layout is the difference between a smooth service and a chaotic one. Here is everything you need to know before you start.

Stainless steel commercial kitchen interior fabricated by Steelkraft

Planning a new kitchen? Let's build it right.

From layout and fabrication to installation and service, Steelkraft designs commercial kitchens that work from the first shift.

Start your build
Get a Quote